PET For PET
This ink is a solvent-based screen printing ink formulated for PET,
ABS, PS, PC, Organic Glass, Horniness PVC etc.
PET, plastic toy and gift, electrical application decoration,
plastic nameplate, plate with trademark, organic glass billboard,
often used transparent PS.
Gloss ink. After printing, the presswork will not erode the surface
of the substrate, no crack on the surface, the pattern is smooth,
clear, and no wrinkle.
Monofilament mesh, 120T.
Using organic solvent resistant emulsions.
40 square meters per kilogram under 350T mesh.
Solvent resistant blade.
This ink should be thinned with thinner approximately 10-30% by
weight base on the climate condition.
Drying by solvent evaporation. Surface dry needs 15-20 minutes,
complete dry allows at least 2 hour. (Drying time depends on actual
weather condition and thinner usage)
Force to dry with hot dryer below 60 degree centigrade is allowed.
Adhesive tape test - use adhesive tape to stick on test surface and
rip off, no ink should come off from test areas obviously.
Using organic solvent to clear the stencil.
Used the specific solvent for PET, used the solvent of benzene and
ketone, please note the eroding.
There is possible difference in the solvent resistant of the PS,
quick dry or posthaste dry solvent can be used to dilute, reduce
the case of eroding.
Alcohol cannot be used to wipe the presswork.
Note the case of eroding the surface of substrate by the printing
ink when dry with hot dryer.
PET for PET Images