Sfr for PS / ABS
This Ink Is a Solvent-Based Screen Printing Ink Formulated for ABS,
PS, PC, PMMA.
Toy and Gift, Label, Displays, Electrical Application Decorations.
Medium Drying and Gloss Ink, Non-Corrosive to Substrates.
Monofilament Mesh, 80t-120t.
Using Organic Solvent Resistant Emulsions.
65-85 Durometer Solvent Resistant Blade, Such as PU.
40 Square Meters Per Kilogram Under 140t Mesh.
This Ink Should Be Thinned With Thinner Approximately 10-20% by
Weight Base on The Climate Condition.
Drying by Solvent Evaporation. Surface Dry Needs 15-20 Minutes,
Complete Dry Allows at Least 2 Hour. (Drying Time Depends on Actual
Weather Condition and Thinner Usage)
Force to Dry With Hot Dryer Below 100º C Is Allowed.
Adhesive Tape Test-Use Adhesive Tape to Stick on Test Surface and
Rip off, No Ink Should Come off From Test Areas Obviously.
Using Organic Solvent to Clear The Stencil.
Product Range and Package
All of The Colors Are Available in 1kg, 5kg and 20kg Containers.
This Ink Does Not Have Alcohol Resistance.
It's The Printer's Responsibility to Pretest The Ink Selected Prior
to Engaging in a Production Run. Allow at Least 24 Hours After Test
Printing to Evaluate The Suitability of The Ink and Its Adhesion to
The Surface. Before Using, The Printer Shall Determine The
Suitability of The
Product for Its Intended Use.
SFR for PS / ABS Images