Plastisol White Ink
Plastisol High Stretch White-NX9009 ink Technical Data
NX9009 Plastisol High Stretch White Ink for 100% Cotton Dark Fabric
NX9009 Plastisol High Stretch White Ink is a good stretch, high
opaque, economical, optically brightened, white underlay for
printing on 100% cotton dark fabric. Mesh should be chosen to print
the least amount of ink while achieving the coverage desired.
Wet Ink Tack
After Flash Tack Decreases with increase in mesh count
Surface Appearance Thick ink film
Opacity / Viscosity High / medium
Bleed Resistance None
Gel Point / Flash Time 165° F (74° C) / according to deposit
Fusion Temperature 320° F (160° C)
Squeegee Hardness / Blade / Angle 70-80 Durometer / sharp / 45°
Squeegee Speed Maximum
Underlay Use ML-9240 low bleed white for 50 / 50 polyester / cotton
Emulsion Direct, indirect emulsion or capillary film
Mesh Count 86-355 mc/in (34-140 mc/cm)
Modifiers and Additives See modifiers and additives section
Storage 65° F to 95° F (18° C to 35° C). Avoid direct sun. Exposure
to temperatures in the 100° F (38° C) range can cause some products
to expand in their containers. Prolonged exposure to these
conditions may cause bulging and leakage from the container.
Opening the container and stirring the product before use may solve
Cleanup Bio-degradable screen washes
Substrate Type 100% Cotton dark fabric
Special Recommendations These inks require heat for proper curing.
Wash for a minimum of 5 wash / dry cycles to test for cure.
Stir prior to printing.
Do not dry clean.
Do not use bleach.
Do not iron printed image area.
Clears and gels will cause yellow to migrate from formulations that
are being overprinted.
Formulate those colors to be overprinted without yellow.
Plastisol High Stretch White Ink for 100% Cotton Dark Fabric (NX9009) Images